Home › End-of-life lookup › Ultra5000 intelligent positioning drives (2098-IPD)
Ultra5000 Intelligent Positioning Drive 7.5 kW 2098-IPD-075 (discontinued)
| Rockwell lifecycle status | Discontinued 31/08/2013 (read on 5 November 2026) |
|---|---|
| Replacement | TDL proposal (Rockwell names no catalog number) |
The Rockwell Product Lifecycle Status tool (read 05/11/2026, description "Ultra 5000 Servo Drive") shows Discontinued 31/08/2013 with replacement category "No planned RA replacement" and no replacement catalog number (N/A). No Rockwell migration guide for Ultra5000 was found; 2198-RM003B covers Ultra3000 drives only. See the TDL proposal below. TDL proposal (not a Rockwell statement): migrate to Kinetix 5100, the family Rockwell recommends for Ultra3000 and Kinetix 3. The Ultra5000 current ratings for this size are in Appendix A of 2098-IN001E, which could not be read; the manual gives 7.5 kW (2098-IN001E p. 2-10). Starting candidate 2198-E2055-ERS (41.3 (58.40) / 91.4 (129.24) A rms (0-pk) continuous/peak, 2198-RM003B Table 8, p. 15), the drive Table 8 pairs with the Ultra3000 2098-DSD-075 (24.7 (35) / 53.0 (75) A rms (0-pk) continuous/peak). Table 3 (p. 10) rates 2198-E2055-ERS at 5.5 kW, so check the motor's continuous and peak current from its nameplate. 2198-E2075-ERS (7.5 kW) has more continuous current (49.0 A rms) but Table 8 lists its peak as 78.0 A rms, below the 91.4 A rms of 2198-E2055-ERS, while Table 3 (p. 10) lists 127.49 A rms; confirm the peak before stepping up. Both need a 170–253 V three-phase supply (2198-RM003B Table 3, p. 10). Confirm the load and the motor/feedback compatibility (motor may need replacing) before ordering. The Ultra5000 runs user programs written in C with the Motion Library (2098-IN001E p. P-3); none of the Kinetix 5100 control modes in 2198-RM003B Table 2 (p. 9) runs user C code, so the motion program must be rewritten, as Kinetix 5100 PR-mode indexing (99 program registers) or as Logix motion in a controller over EtherNet/IP (IO mode). This is not a drop-in replacement.
Key data
| Family | Ultra5000 Intelligent Positioning Drive, programmed in C with the Motion Library (2098-IN001E p. P-3) |
|---|---|
| Input voltage | 100–240 V AC, 50/60 Hz, three phase (L1, L2, L3) (2098-IN001E pp. 2-10, 2-12) |
| Continuous output power | 7.5 kW (2098-IN001E p. 2-10) |
| I/O | 16 digital inputs, 8 digital outputs (7 transistor, 1 relay), 2 analog inputs, 2 analog outputs (2098-IN001E pp. 2-20 to 2-24) |
Lifecycle status changes over time: confirm the current status on the Rockwell product page or in the Product Compatibility and Download Center before ordering.
Related services: Lifecycle review and spare parts Rockwell Automation upgrades
Other catalog numbers in this family: Ultra5000 intelligent positioning drives (2098-IPD)
2098-IPD-005 2098-IPD-005-DN 2098-IPD-010 2098-IPD-010-DN 2098-IPD-020 2098-IPD-020-DN 2098-IPD-030 2098-IPD-030-DN 2098-IPD-075-DN 2098-IPD-150 2098-IPD-150-DN 2098-IPD-HV030 2098-IPD-HV030-DN 2098-IPD-HV050 2098-IPD-HV050-DN 2098-IPD-HV100 2098-IPD-HV100-DN 2098-IPD-HV150 2098-IPD-HV150-DN 2098-IPD-HV220 2098-IPD-HV220-DN
Sources
- Rockwell Automation, Rockwell product page 2098-IPD-075 — read on 5 November 2026
- Rockwell Automation, Rockwell Product Lifecycle Status tool (read 05/11/2026)
- Rockwell Automation, 2098-IN001E-EN-P, Ultra5000 Intelligent Positioning Drives Installation Manual, Apr 2002 — p. P-3; 1-4; 2-10; 2-12; 2-20 to 2-24
- Rockwell Automation, 2198-RM003B — p. 9; 10; 13; 15