Home › End-of-life lookup › Ultra5000 intelligent positioning drives (2098-IPD)
Ultra5000 Intelligent Positioning Drive 3 kW DeviceNet 2098-IPD-030-DN (discontinued)
| Rockwell lifecycle status | Discontinued 01/04/2013 (read on 5 November 2026) |
|---|---|
| Replacement | TDL proposal (Rockwell names no catalog number) |
The Rockwell Product Lifecycle Status tool (read 05/11/2026, description "Ultra 5000 Servo Drive") shows Discontinued 01/04/2013 with replacement category "No planned RA replacement" and no replacement catalog number (N/A). No Rockwell migration guide for Ultra5000 was found; 2198-RM003B covers Ultra3000 drives only. See the TDL proposal below. TDL proposal (not a Rockwell statement): migrate to Kinetix 5100, the family Rockwell recommends for Ultra3000 and Kinetix 3. The lifecycle-tool description ("DRIVE 15A/30A ULT MC") gives 15 A / 30 A without stating the current basis. If these are 0-peak values, 2198-E1020-ERS (13.4 (18.95) / 53.03 (74.98) A rms (0-pk) continuous/peak, 2198-RM003B Table 8, p. 15) covers them; Table 8 makes the same pairing for the 15 A / 30 A (0-pk) Ultra3000 2098-DSD-030. If 15 A is rms, the next size 2198-E2030-ERS (17.9 / 55.95 A rms continuous/peak, 2198-RM003B Table 3, p. 10) needs a 170–253 V three-phase supply, while the 2098-IPD-030 is wired single phase (2098-IN001E p. 2-9). Read the drive nameplate first. Confirm the load and the motor/feedback compatibility (motor may need replacing) before ordering. The Ultra5000 runs user programs written in C with the Motion Library (2098-IN001E p. P-3); none of the Kinetix 5100 control modes in 2198-RM003B Table 2 (p. 9) runs user C code, so the motion program must be rewritten, as Kinetix 5100 PR-mode indexing (99 program registers) or as Logix motion in a controller over EtherNet/IP (IO mode). This is not a drop-in replacement. Kinetix 5100 uses EtherNet/IP for control; the guide mentions no DeviceNet port on it (2198-RM003B Table 7, p. 13), so the DeviceNet link must be re-engineered.
Key data
| Family | Ultra5000 Intelligent Positioning Drive, programmed in C with the Motion Library (2098-IN001E p. P-3); DeviceNet version (2098-IN001E p. 1-4) |
|---|---|
| Input voltage | 100–240 V AC, 50/60 Hz, single phase (L1, L2/N) (2098-IN001E pp. 2-8, 2-9) |
| Continuous output power | 3 kW (2098-IN001E p. 2-8) |
| Continuous / peak output current | 15 A / 30 A (Rockwell lifecycle tool description; rms or 0-pk not stated) |
| I/O | 16 digital inputs, 8 digital outputs (7 transistor, 1 relay), 2 analog inputs, 2 analog outputs (2098-IN001E pp. 2-20 to 2-24) |
Lifecycle status changes over time: confirm the current status on the Rockwell product page or in the Product Compatibility and Download Center before ordering.
Related services: Lifecycle review and spare parts Rockwell Automation upgrades
Other catalog numbers in this family: Ultra5000 intelligent positioning drives (2098-IPD)
2098-IPD-005 2098-IPD-005-DN 2098-IPD-010 2098-IPD-010-DN 2098-IPD-020 2098-IPD-020-DN 2098-IPD-030 2098-IPD-075 2098-IPD-075-DN 2098-IPD-150 2098-IPD-150-DN 2098-IPD-HV030 2098-IPD-HV030-DN 2098-IPD-HV050 2098-IPD-HV050-DN 2098-IPD-HV100 2098-IPD-HV100-DN 2098-IPD-HV150 2098-IPD-HV150-DN 2098-IPD-HV220 2098-IPD-HV220-DN
Sources
- Rockwell Automation, Rockwell product page 2098-IPD-030-DN — read on 5 November 2026
- Rockwell Automation, Rockwell Product Lifecycle Status tool (read 05/11/2026)
- Rockwell Automation, 2098-IN001E-EN-P, Ultra5000 Intelligent Positioning Drives Installation Manual, Apr 2002 — p. P-3; 1-4; 2-8; 2-9; 2-15; 2-20 to 2-24
- Rockwell Automation, 2198-RM003B — p. 9; 10; 13; 15